View RP20-1225SFN_744778.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

Features

2:1 Wide Input Voltage Range 20 Watts Output Power 1.6kVDC Isolation UL Certified Fixed Operating Frequency Six-Sided Continuous Shield Standard 50.8 x25.4x10.2mm Package Efficiency to 89%
POWERLINE
DC/DC-Converter
RP20S_DF Series
20 Watt 2" x 1" Package Single & Dual Output
Selection Guide 12V, 24V and 48V Input Types
Part Number Input Range VDC 9-18 9-18 9-18 9-18 9-18 9-18 9-18 18-36 18-36 18-36 18-36 18-36 18-36 18-36 36-75 36-75 36-75 36-75 36-75 36-75 36-75 9-18 9-18 18-36 18-36 36-75 36-75 Output Voltage VDC 1.5 1.8 2.5 3.3 5 12 15 1.5 1.8 2.5 3.3 5 12 15 1.5 1.8 2.5 3.3 5 12 15 12 15 12 15 12 15 Output Current mA 6000 6000 6000 5000 4000 1670 1330 6000 6000 6000 5000 4000 1670 1330 6000 6000 6000 5000 4000 1670 1330 833 667 833 667 833 667 Input (4) Current mA 1014 1200 1603 1719 2008 2062 2052 493 584 781 838 980 1006 1002 247 288 391 414 490 497 500 2032 2034 1004 1005 496 502 Efficiency(5) Capacitive(6) Load max. % F 78 79 82 84 87 85 85 80 81 84 86 89 87 87 80 82 84 87 89 88 87 86 86 87 87 88 87 65000 65000 33000 13000 6800 2200 755 65000 65000 33000 13000 6800 2200 755 65000 65000 33000 13000 6800 2200 755 680 450 680 450 680 450
RP20-121.5SF RP20-121.8SF RP20-122.5SF RP20-123.3SF RP20-1205SF RP20-1212SF RP20-1215SF RP20-241.5SF RP20-241.8SF RP20-242.5SF RP20-243.3SF RP20-2405SF RP20-2412SF RP20-2415SF RP20-481.5SF RP20-481.8SF RP20-482.5SF RP20-483.3SF RP20-4805SF RP20-4812SF RP20-4815SF RP20-1212DF RP20-1215DF RP20-2412DF RP20-2415DF RP20-4812DF RP20-4815DF
UL-60950-1 Certified
* no suffix for CTRL function with Positive Logic (1=ON, 0=OFF), this is standard * add /N for CTRL function with Negative Logic (0=ON, 1=OFF)
www.recom-international.com
July-2006
255
POWERLINE
DC/DC-Converter
RP20-S_DF Series
RP20-1205SF With Heat Sink
125 100
Derating-Graph (Ambient Temperature)
RP20-1205SF
125 100 75 Output Power (%) 50 25 0 -40 -25 -10 0 50 60 70 80 90 100 65C
Output Power (%)
Natural Convection
75 50 25
Natural Convection
Ambient Temperature Range (C)
50 60 70 80 90 100 Ambient Temperature Range (C)
0 -40 -25 -10 0
Derating graphs are valid only for the shown part numbers. If you need detailed derating-information about a part-number not shown here please contact our technical customer service at info@recom-development.at
Typical Characteristics
RP20-481.5SF
Efficiency VS Input Voltage 83 82 81 80 79 78 77 76 75 74 73 72 82 81 80 79 78 77 76 74 72 70 65 60
RP20-481.5SF
Efficiency VS Output Load
Efficiency (%)
36
40
45
50
55
60
65
70
75
Efficiency (%)
1
2
3
4
5
6
Input Voltage (V)
Output Load (A)
Specifications (typical at nominal input and 25C unless otherwise noted)
Input Voltage Range 12V nominal input 24V nominal input 48V nominal input 9-18VDC 18-36VDC 36-75VDC L-C Type (Complies with ETS300 132 part 4.4) 12V Input 24V Input 48V Input 5V/ms max 36VDC 50VDC 100VDC 20mAp-p DC-DC ON DC-DC OFF Nominal input 10ms typ. Open or 3.0V < Vr < 12V Short or 0V < Vr < 1.2V 2.5mA 20W max. 1% 10% continued on next page 256 July-2006 www.recom-international.com
Input Filter (see Note 9) Input Voltage Variation dv/dt Input Surge Voltage (100 ms max.)
Input Reflected Ripple (nominal Vin and full load) (see Note 3) Start Up Time (nominal Vin and constant resistor load) Remote ON/OFF (see Note 7) Remote OFF input current Output Power Output Voltage Accuracy (full Load and nominal Vin) Voltage Adjustability
POWERLINE
DC/DC-Converter
Specifications (typical at nominal input and 25C unless otherwise noted)
Minimum Load (see Note 1) Line Regulation (low line, high line at full load) Load Regulation (25% to 100% full load) Cross Regulation (asymmetrical load 25%/100% full load) Ripple and Noise (20MHz bandwith) (Measured with a 1004pF/50V MLCC) Temperature Coefficient Transient Response (25% load step change) Over Voltage Protection Zener diode clamp (only single) 1.5, 1.8, 2.5, 3.3V 5V 12V 15V Single Dual
RP20-S_DF Series
0% 10% of full load 0.2% 0.5% Dual Single 1.5, 1.8, 2.5, 3.3V Single 5, 12, 15V Dual 5, 12, 15V 5% 60mVp-p 75mVp-p 100mVp-p 0.02%/C max. 500s 3.9V 6.2V 15V 18V 150% typ Hiccup, automatic recovery Input to Output Input (Output) to case see Selection Guide" table 1600VDC min. 1600VDC min. 1 G min. 1000pF max. 500kHz typ. -40C to +85C(with derating) +100C -55C to +105C Natural convection Natural convection with Heat Sink 12C/Watt 10C/Watt MIL-STD-810D 10-55Hz, 2G, 30 Min. along X, Y and Z 5% to 95% RH Nickel plated copper Non-conductive black plastic Epoxy (UL94-V0) EN55022 EN55022 EN61000-4-2 EN61000-4-3 EN61000-4-4 EN61000-4-5 EN61000-4-6 Class A Class A Perf. Criteria 2 Perf. Criteria 2 Perf. Criteria 2 Perf. Criteria 2 Perf. Criteria 2 27g 50.8 x 25.4 x 10.2mm 1791 x 103 hours
Over Load Protection (% of full load at nominal Vin) Short Circuit Protection Efficiency Isolation Voltage Isolation Resistance Isolation Capacitance Operating Frequency Operating Temperature Range Maximum Case Temperature Storage Temperature Range Thermal Impedance (see Note 8) Thermal Shock Vibration Relative Humidity Case Material Base Material Potting Material Conducted Emissions (see Note 10) Radiated Emissions ESD Radiated Immunity Fast Transient Surge Conducted Immunity Weight Dimensions MTBF (see Note 2)
www.recom-international.com
July-2006
257
POWERLINE
DC/DC-Converter
Notes :
RP20-S_DF Series
1. The RP20-S_DF series requires a minimum of 10% loading on the output to maintain specified regulation. Operation under no-load condition will not damage these devices, however they may not meet all listed specification. 2. BELLCORE TR-NWT-000332. Case l: 50% Stress, Temperature at 40C (Ground fixed and controlled environment). 3. Simulated source impedance of 12H. 12H inductor in series with +Vin. 4. Maximum value at nominal input voltage and full load of standard type. 5. Typical value at nominal input voltage and full load. 6. Test by minimum Vin and constant resistor load. 7. The ON/OFF control function can be positive or negative logic. The pin voltage is referenced to negative input. Positive logic ON/OFF is standard, no suffix (Ex. RP20-2405SF) Negative logic ON/OFF is marked with suffix-N (Ex. RP20-2405SF/N). 8. Heat sink is optional and P/N: 7G-0020A. 9. An external filter capacitor is required for normal operation. The capacitor should be capable of handling 1A ripple current for 48V/24V models. RECOM suggest: Nippon chemi-con KMF series, 220F/100V, ESR 90m . 10.See application notes for EMI-filtering.
Package Style and Pinning (mm)
3rd angle projection
50.80
25.40 10.20
dia. 1.0 15.20 20.30
5.6 2.50 5.10
Pin Connections
3 1 2 6
Bottom View
10.20
4
10.20
5
12.70
Pin # 1 2 3 4 5 6
Single +Vin -Vin +Vout Trim -Vout CTRL
Dual +Vin -Vin +Vout Com -Vout CTRL
Pin Pitch Tolerance 0.35 mm
External Output Trimming
Output can be externally trimmed by using the method shown below.
5
Trim Up RU
4
Trim Down RD
4
258 July-2006
3
www.recom-international.com

▲Up To Search▲

Price & Availability of RP20-1225SFN

	To Download RP20-1225SFN Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .